Of course, without reinstalling the system.
Press the ESC key or reboot, press F8, then enter VGA mode or secure mode, enter the system, and then set the resolution low
Go into safe mode, lower the resolution, restart the computer. It should be ok. Now the display, and then adjust the resolution will remind the user, if the monitor does not support excessive resolution, press the ESC button to return to the original resolution.
Use the resolution of the display to reset the resolution, or enter safe mode, uninstall graphics cards, reinstall, can be restored to normal.1, replace the display operation method:For example: display the highest support resolution of 1440 * 900, and set to 1920 * 1080 resolution, LED display "input is not supported at this time", to borrow a 1920 x 1080 resolution display connected to the host, you can display resolution, will now be set back to 1440 x 900. You can connect the original display normal display.2 、 safe mode operation method:If there are no conditions to find another display, then press the power switch of a host, wait for it after the shutdown, reboot, and press F8, select "safe mode" to start the computer, in the "my computer" right click - Device Manager - - display graphics will be uninstall, restart the computer, the host will now automatically install the graphics driver, installed again after the restart, you can return to normal display.
