Home > categories > Construction & Real Estate > Corner Guards > What is the cement corner when plastering?
Question:

What is the cement corner when plastering?

What is the cement corner when plastering?

Answer:

Will be used in square feet square, side of the window frame side to frame wall void prevail, the other side to tendon thickness prevail, in the ground to draw a good line, according to the thickness of the plaster layer sticky stickers and with a tray board hanging vertical. In the other side of the edge of the edge of the corner of the wall of the pad of cement mortar, the outer corner and the outer edge of the plate with the flush; side of the wipe after the board to move to the side of the card to stabilize, and hanging vertical Straighten the ruler, the corner of the other side of the cement mortar layering wipe; and then gently removed by the foot board. To be a little corner of the corner after a little water, with Yang angle trowel and plain cement wipe the small rounded corners. And finally left on both sides of the corner angle width, the excess mortar to 45 ° slant cut off.
Using 1: 2 cement mortar to wipe the dark corners, in order to increase the angle of the plaster layer of the hardness and strength. The height of the corner should not be less than 2m, the width of each side should not be less than 50mm.

Share to: