What are the precautions for using the cable mesh and how to use it?
Cauldron but can not legitimate. Generally behind the TV has more than 2 way video / audio input interface, connected set-top boxes all the way, all the way to pick you up before a big pot on the line, but the cauldron to close the program Most digital intoxicated Fung-Holland Bong phthalocyanine Siegesbeckiae solitary ax Gurkha TV inside all included, did not make much sense
Design time will not be set up, because, when you check the low-voltage lines, but also to the high-pressure corridor. The Design unreasonable ,,, As for the norms, do not know
No instructions are clearly stated or allowed. In the "Code for Design of Electric Power Cables" (GB-2007), the provisions of 5.1.3 stipulate that if the number of cables in the same channel is large, if the laying of the multi-layer bracket on the same side, the following provisions shall be met: High to low power cables, strong to weak control and signal cables, communication cables "top to bottom" in the order. When the horizontal channel contains more than 35kV high-voltage cable, or to meet the introduction of the cabinet tray to meet the requirements of the bend radius requirements, should be "bottom-up" in order. In the same project or the cable channel extends to different projects, should be arranged in the same order. 2 bracket space by the channel space constraints, 35kV and below the adjacent voltage level power cables can be arranged in the same layer of support, 1kV and below the power cable can also be with the strong control and signal cable configuration in the same layer of the bracket. 3 The work of the same important circuit and the backup cable should be arranged on the different layers of the brackets. It is possible to note that it is restricted by passage space from section 2. If you really want to lay together, it should be noted that 10kV cable can not use single-core cable, you need to use three-core cable.
