What is the difference between a step motor six and four
The number of different lines is caused by different phases. And the general power is smaller by using a common thread to reduce the number of connections.
Stepper motor there is a vast difference between four and six lead wire, with four lines there are two possible, one kind is bipolar, that is, four line and outlet is four wire. The second one is the unipolar, the line four. There are two possibilities for the sixth line, but they're both bipolar motors, and they're just different. The difference between two phase four and two phase six steps: The same thing, the six-wire machine can be connected to four lines. The driver of the six-wire machine can only use the six-wire machine, but the four-wire motor can be driven by a six-wire machine and a four-wire machine. This is the difference between the half-bridge and the bridge. The six-wire motor actually pulls two heads out of the two winding of the four-wire machine. If you have to say the difference, the six-wire machine is more suitable for running than the four-wire machine.
Step by step motor: This is a two-phase hybrid stepping motor, there are two windings, each winding has two wires, the multimeter can be judged, electricity is the same winding, or you can also use a more simple way to judge winding: short answer any two of the motor wire, rotation axis, if it is found that increasing the resistance and states that this is a two wire winding, the rest of the rest of the two wires to a winding. Color don't tube, connected the two wires of each winding casually pick up in drive A and B, if it is found that motor reversal, as long as the two wires of A phase reversed. Step 4: step 4: The two sets of coils are connected to A + A - the other group B + B -. So this is just getting the drive, and then you're going to step two in two phases A plus A minus B plus B minus.
