What is the faucet in the basin?
Head tied to the lower part of the gap leakage reasons: it is because the gland within the triangular gasket caused by wear. You can loosen the screw to remove the tie head, then remove the gland, and then remove the inside of the gland inside the triangle seal, put on a new one.
There is no water outlet and water leakage: when the faucet within the axis of the gasket wear will appear this situation. Solution: Select the corresponding pliers according to the size of the faucet to tap the faucet gland, and remove the wear of the shaft with a clip, and then replace the new pad to solve the problem.
There is a leak at the junction of the faucet to take over: Check if the nut at the lower part is loose. Solution, tighten the nut or replace the new U-type gasket.
