What is the normal speed in the transportation of the concrete mixer
12 square concrete mixer, 6 * 4 maximum wheelbase can be installed 12 square 14 square, must use 8 * 4 chassis (don't want to type to copy a bit!) ! Note: 1, the mixer has a low gear, and the novice should pay attention. No more than 30 yards for the car turning. The car itself is in control. 3, pay attention to the car. You must get out of your car to see the road, otherwise you will be miserable. 4, 24 hours to the sleepy at night, but must put the material to the site after finishing Can have a rest. On the way or captain will drive to you ha ha! I am ~, Other things like the road should be familiar, the road is the most important.
In the case of idle speed (engine speed of 600 r/min) generally feed mixing every 4 r/min, when discharging at around 6 r/min, the gas engine speed from 1500 to 2000 r/min when the hydraulic pump and motor mechanical efficiency is highest, feed mixing around 10 r/min, when discharging 12 to 14 r/min. Speed is adjustable, through adjust the driving torque of each point, can make the speed increase or decrease, when the stirring speed too fast will affect the service life of the hydraulic system, general stirring speed in the process of transportation for the 3 revolutions per minute.
1 to 3 RPM for transportation Normal 0 -- 6 is all right
