What is the principle of ice filled sensors in ice machines?
Temperature sensorThe temperature sensor of the snowflake ice maker is three, which are respectively arranged on the ice stirring mechanism, the condenser and the ice bucket.Stir the ice temperature sensor on the mechanism is used to feel the temperature is relatively low, even too large transmission resistance, that is to say when the temperature is relatively low, the flow is blocked, churned ice institutions to the torque, the motor input current surge, this time need red ice, turn on the electric magnetic valve for refrigerant compressor stir the ice directly into the mechanism, rather than through the condenser before entering the churned ice mechanism, this series of work is to be completed by the temperature sensor to detect and control system of the.
Water level sensorTank water level sensor makes the inlet solenoid valve open circulating water pump work who entered the water in the water tank kept in the ice tray (evaporator) above the stream and the refrigeration compressor, the water slowly frozen in the ice tray inside, until the ice thickness sensor of ice, the circulating water pump stop, make ice thermal compression mechanism the ice melting and separation, since the ice tray is vertical and each ice trough is downward sloping, about 15 seconds of ice from the ice tray onto the refrigerator (ice box), ice slides will hit a sensor (Zheng Mingbing block to fall, the ice tray is empty) on the above steps until the refrigerator inside the ice to hit the ice slide sensor when the counter ice ice in the fall but not cut off the sensor switch, the ice machine can not carry out the next step of work.
Infrared photoelectric sensorInfrared photoelectric sensor for refrigerator of ice maker. The utility model is mainly composed of a bracket, an infrared emitting tube, an infrared receiving tube and a connecting wire, wherein the infrared emitting tube and the infrared receiving tube are respectively arranged at both ends of the bracket. The utility model is based on the principle of infrared photoelectric detection, automatic ice machine ice storage refrigerator with ice making machine, the automatic stop working after compared with other existing control methods, with high control precision, long service life, no contact, no environmental temperature and ice storage box sealing effect, etc. low voltage operation safe and reliable, and suitable for the needs in the refrigeration industry to develop in the direction of no fluoride.
What is the principle of ice filled sensors in ice machines?The other 6 O Yi | browse 2029Recommended for 2016-02-04 07:53:41 best answer1. temperature sensorThe temperature sensor of the snowflake ice maker is three, which are respectively arranged on the ice stirring mechanism, the condenser and the ice bucket.Stir the ice temperature sensor on the mechanism is used to feel the temperature is relatively low, even too large transmission resistance, that is to say when the temperature is relatively low, the flow is blocked, churned ice institutions to the torque, the motor input current surge, this time need red ice, turn on the electric magnetic valve for refrigerant compressor stir the ice directly into the mechanism, rather than through the condenser before entering the churned ice mechanism, this series of work is to be completed by the temperature sensor to detect and control system of the.The temperature sensor in the condenser works like this, when the condenser temperature is too high, the cooling effect of the cooling fan motor produced too late, when the temperature sensor to feel the temperature is too high, through the A/D conversion, the analog signals into digital signals, through the program to determine, issued a directive to control the compressor motor relay accordingly, the ultimate control of compressor working state.The temperature sensor of the role is to control the ice bucket with ice is up to a certain height, when the ice reaches a certain height, feel the temperature sensor, the temperature is relatively low, generally set the temperature of 7 degrees, but also through the A/D analog digital conversion module, through the process of judgment, make corresponding instructions, instructions, the whole system controlled on-off control of the final judgment, the operation of the system or not.
