What is the process flow of the artificial lawn construction process?
Function line cutting and inlaying. Find the step has been put line position, using the function of tool cutting line for special construction of artificial grass, in step three the viscose method will be white line cut out into the function of bonded area, with a white line function for compacting compaction.
Viscose. Open the connecting position of the two volumes of lawn, and then put the belt in the center. The use of artificial lawn special glue - Taiwan long time brand of artificial grass special glue, brushing the surface of the connecting belt, and with the overlap of the artificial lawn bottom back part. When the glue is dried slightly, a good adhesive force is formed, and then two rolls of lawn edge are covered on the strap and compacted.
Bedding and trimming. Pull out the mouth of the package nail. Unified into the garbage can, to avoid falling into the field, each roll of lawn all spread out, spread out the lawn, straighten it, the grass roll side stitching butt neatly. The use of artificial grass to build professional construction tools to cut off the edge of lawn margin, so that the grass line between the two adjacent lawn grass line spacing is the best.
Unloading and discharging. When unloading, in general, the use of professional lifting equipment ensures that the lawn is in good condition. Arrange the lawn on each roll according to the arrow in the lawn packing. When the line is released, locate the center of the field, use steel tape, cement nail and elastic wire, and release the function line according to the drawing.
Sand injection and colloidal particle injection. Fixed place of quartz sand and rubber - Guangzhou OSIM artificial grass TPE environmental protection (TPE particles of wheat grain filling particles), quartz sand and poured on the ground to open the particles, and the paving, and artificial turf for construction of flyme lawn. Six 、 inspection and acceptance.
