What is the process of using a cement pressure plate to dry the tile? What do I need to know about the specifications of the light steel keel, how thick the board
Are you sure to use light steel keel? If it is so: small wall 50 * 35 * 0.5 large wall with 75 * 35 ~ 40 * 0.5, or to keel with a small, vertical keel with a large. It seems to mention the problem did not indicate the white intention, the ordinary partition with light steel keel to do skeleton lock silicate cover can also be tiled but not for the bathroom, if you really use the cement board hanging in the tile, keel should be used 80 * 50 * 5 channel or L50 * 50 * 4 angle welding to do skeleton bar, consider the good force
Process: the traditional, inconvenient practice is to use the steel wire hanging and then wiping the cement leveling, and then use the wet paste tiles. My advice is to use tile adhesive paste directly tile, fast efficiency, and after the process of ditch groove beautiful, unlike the cement paste the black seam.
Board use 6MM or 8MM can, depending on the size and weight of specific tiles, small pieces of brick 6MM thick enough. Floor tiles and other large size brick, it is recommended to use 8MM thick plate.
This process is the traditional practice, said in front of the keel of course, is 50 and 75 of the main, depending on the wall area, keel spacing is the same, a large area of 400-600MM can accept, if the package, duct Of course, depending on the size of the pipeline.
