My seat toilet water tank is not what is the reason, can not flush the toilet, too distressed!
Toilet water is by the water pressure on the Sheung Shui, is not the water on the angle of the valve did not open ah, or water pipe blocked?
Toilet inside the sink also has a filter, filter a long time too much scale blocked, so that tap water can not come. Just remove the filter clean and clean it.
Remove the filter Clean the solution steps:
The valve connected to the water tank on the hose closed, or a little operation will be sprayed. And then washed the toilet, the water tank to the water left out.
Along the water hose, look under the toilet, there is a hex nut to the hose and the water tank in the water (a standing plastic pipe) together, with a wrench to turn the nut, and then along the position just in the nut Look up, there may be a nut and the same position, the same can be rotated, the same function of the take, but also screw down, two processes, the water can be taken out from the toilet inside.
Remove the water, see inside the tube there is a small square column, pull out with a straight nose pliers, you can see the square column and the filter is one, out together.
Use waste toothbrush and the like, clean the filter. There is a scale cleaner better, no problem is not, I was in addition to scale agent plus a bubble for a filter, it is particularly clean, and can also be mixed with some of the water into the sink, but also to the inside Scale removed. Are clean and clean.
The corner of the toilet to the lower corner of the metal angle to open the water can be opened
The problem lies in the inlet valve, should be stuffed by something, such as sand or water impurities!
In this case, it is recommended that you look for your toilet for sale after you swap off the water valve.
