Question:

What is the valve?

What is the valve?

Answer:

Is the switch, switch on the pipeline and can walk on water, air, oil and so on go. A lot of categories, you can control the on-off, control pressure safety valve, as well as a lot of filtering valves.
The definition of a valve "valve" is defined in the fluid system, used to control the direction of the fluid, pressure, flow device. A valve is a device that flows or stops the medium (liquid, gas, powder) in a pipe and equipment and controls its flow. Valve is the control component of pipeline fluid transportation system. It is used to change the passage section and medium flow direction, and has the functions of diversion, cut-off, adjustment, throttling, check, diversion or overflow, pressure relief, etc.. For fluid control valves, valve from the simplest to the most various valves automatic control system used in complex, its many varieties and specifications, the valve nominal diameter from industrial piping and instrumentation valves tiny tolarge diameter 10m valve. The valve can be used for the control of water, steam, oil, gas, mud, all kinds of corrosive medium, liquid metal and radioactive fluid and other types of fluid flow, the valve working pressure from 0.0013MPa to 1000MPa ultra high pressure, working temperature from ultra low temperature to high temperature of 1430 DEG -269. Control valve can be a variety of transmission methods, such as manual, electric, hydraulic, pneumatic, worm gear, electromagnetic dynamic, electromagnetic hydraulic, electric hydraulic, pneumatic and hydraulic, gear, bevel gear drive; in pressure, temperature or other forms of sensor signals under the action according to the requirements. Or do not rely on a simple sensor signals to open or close the valve on the drive or automatic mechanism to make the opening and closing parts for lifting, sliding, rotating or turning motion, thus changing the size of the flow area to achieve its control function.
valveDefinition of scientific and technical termsValveEnglish Name: valvevalveValve is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure. Valves used in fluid control systems, from the simplest stop valve to a very complex automatic control system used in a variety of valves, a wide range of varieties and specifications. Valves can be used to control air, water, steam, a variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow.Definition 1: a device used to control flow in a pipe.Subject: electricity (first level discipline); hydraulic construction (two disciplines)Definition 2: equipment installed in a pressure pipe to control the flow of water.Subject: Water Conservancy Science and Technology (first level discipline); hydraulic construction (two disciplines); gate and hoist (three disciplines)Valve historyThe valve is produced with the flow of the pipe. Human valves have been used for nearly 4000 years. In ancient China from the brine well absorb salt brine, once in a bamboo pipe used in cork valve. In the 1800 BC, the ancient Egyptians used similar wooden cocks to control the distribution of water to build large water conservancy projects to prevent the Nile from overflowing. These are the embryonic form of the valve. The extensive use of industrial valves began only after Watt invented the steam engine. In the early twentieth Century, there were valves of cast steel, wrought steel and forged welded joints.

Share to: