Home > categories > Minerals & Metallurgy > Magnetic Materials > What materials are in a armature?
Question:

What materials are in a armature?

I have a project on a armature and i need to know the materials that are in it

Answer:

Octane boosters are a joke. If you read the fine print, each bottle only raises the octane something like 0.3 points. So you go from 91 to 91.3. Useless. Don't buy them. The best way to clean out carbon buildup from your engine is to get out there and floor it. Drive it hard. KN filters suck. They are very thin and let a ton of dust through. I wouldn't recommend them.
Well, an armature are inner supports for a clay piece of art. so it could be plastic or metal.
The armature is the part of a motor of generator that handles the current. It is composed of coils of wire (usually copper) around pieces of iron or other ferromagnetic material which creates a magnetic field from current, or creates a current from a magnetic field. It can be on the rotor (part that rotates) or the stator (stationary part).
Armature: The power-producing component of an alternator, generator, dynamo or motor. The armature can be on either the rotor or the stator in a motor it is the part which moves o the application of current in a generator it is the part that produces the voltage n the armature, an electromotive force (EMF) is created by the relative motion of the armature and the field. When the machine is acting as a motor, this EMF opposes the armature current, and the armature converts electrical power to mechanical torque (and power, unless the machine is stalled) and transfers it to the load via the shaft. When the machine is acting as a generator, the armature EMF drives the armature current, and shaft mechanical power is converted to electrical power and transferred to the load. (In an induction generator, these distinctions are blurred, since the generated power is drawn from the stator, which would normally be considered the field.) it consists of a magnetic material which is mostly laminated to prevent eddy current. the windings made of copper coil is wound around it in a definite pattern
Additives. Probably not much help. Octane boost some help. KN and exhaust will net a little power, but not a lot.

Share to: