What method is used to solder the brass plate before it is deformed?
The use of oxygen welding, the first two blocks on the plane, together, the seam in advance into the hypotenuse, two splicing together through the V slot in the welding groove can be filled with v,
If there is no deformation at all, we can only use the method of "brazing in the furnace", that is, the flux is applied to the interface and then fed into a large furnace which can be controlled by temperature, and then heated to the brazing agent to melt and cool. But this approach is generally not easy to implement.If the requirement is not high, we can use MIG arc brazing, choose lower melting point of aluminum silicone welding wire, using short circuiting welding specification, so that small heat input, small deformation. If you can use special CMT welding machine is the best, that is, equipment prices are high, to about 200 thousand yuan.
Brazing of brass by cryogenic brazing will not deform the brass sheet.
Brazing of brass by cryogenic brazing will not deform the brass sheet.
