What methods and measures should be adopted for the maintenance of construction machinery?
Once this happens, can supplement the epoxy resin or use soap daub, emergency plugging. If there is a hole, you can use the cork to entertain and, if necessary, tie it with wire or rope. If the pipe joints loose and oil spills, you can use random belt of raw tape at the thread wrapped 3-5 laps, it can be tightened.
The use of construction machinery for a long time, will produce Water Leakage and oil spills, leakage phenomenon, emergency plugging, more suitable for construction machinery in the tunnel for a long time, because of the limited working space, prone to hydraulic or diesel fuel tank due to collision caused leakage fault.
Such as bulldozers in operation, the engine suddenly stopped, the demolition found that the engine connecting rod bearings burned. Because there is no replacement on the spot, the solder is repaired by soldering, and the surface of the surface is smoothed and sized by a knife. After cleaning and loading, the diesel engine has been restored to work.
Construction machinery in the process of operation or driving, if its sudden failure, should be used to repair a simple way, so that it can reliably travel or operation.
