What's the depth of the new tyre pattern?
A tire is a ring shaped elastic rubber product that is grounded and mounted on various vehicles or machinery. The utility model is usually arranged on the metal rim, can support the vehicle body, buffer the external impact, realize the contact with the road surface, and guarantee the driving performance of the vehicle.
The shape and depth of the tread on the tread have direct influence on the driving performance of the car. In order to ensure the effectiveness of the pattern, each tire pattern wear limit, there are specific provisions. Once the tread wear convex block distance to the bottom of the trench pattern about 1.6mm (1/16 inch), said mark pattern has been removed, at this time will reveal the narrow horizontal strip of light tread, so as to alert the driver, the tire has to be replaced time.The following are some effective ways to prevent tire pattern loss:1. Master the tire inflation standard and check the tire usage regularly. This brand of wind Rimula tire pressure table is the metal texture of mechanical tire pressure gauge TG10, precise and durable; handle with pressure relief, can also be continuous pressure relief pressure intermittent, ensure the tire can be used at the correct pressure. 2, reasonable driving speed. 3, keep the correct four wheel alignment. 4. Drive the car according to the operating standard. 5, conscientiously implement the tire maintenance operations. 6. Assemble tyres reasonably.
Tires are often used in complex and demanding conditions. They are subjected to various deformations, loads, forces and high and low temperatures while traveling. Therefore, they must have high load-carrying performance, traction performance and cushioning performance. It also requires high wear resistance and flex resistance, as well as low rolling resistance and heat build-up. Half of the world's rubber consumption is used in tire production, showing the capacity of tires to consume rubber.
Car new tires in general 8-10mm, trucks are generally 17-20mm, and some deep patterns, some shallow, tire manufacturers are different, the depth of the pattern will vary somewhat,The tread depth shall be checked according to the following standard:Good: greater than 3.5mmSuggest changing next time: 2.5~3.5mmNeeds to be replaced: less than 2.5mmReplacement limit: 1.6mm
