Is it convenient to use horizontal feed or vertical feed mixer?
Self-propelled traction type fixed stationTo say what kind of good, in fact, still needs, and self-propelled tower mark TMR for ranchers provides the greatest autonomy, because they can move freely and stir in the right circumstances. Similarly, they can load the feed individually without additional machinery and staff. Avoid the movement and loading of the tractor, the most easy to operate.
Advantages and disadvantages of vertical feed mixer.Advantages: the vertical feed mixer has the advantages of less power consumption, small occupation area, low price and high cost performance, and is suitable for small-scale feed processing.Disadvantages: when this kind of vertical feed mixing equipment has the biggest weakness, the mixing uniformity is low, it can only reach about 87%, and the mixing cycle is longer, the production efficiency is lower, and the output is about 500-1500 kilograms per hour. One of the drawbacks of this vertical mixing device is that the discharge is not complete, and the bottom of the barrel often has surplus material which can cause waste.Advantages and disadvantages of horizontal feed mixer.Advantages: the probability of horizontal feed mixing machine used in feed processing is very large, because this feed machine has high mixing uniformity, short mixing time, high production efficiency, fast unloading, unloading clean, and many other advantages of small residue. The more common horizontal feed mixer is stainless steel double blade mixer, horizontal screw mixer and so on.Disadvantages: compared with the vertical feed mixer, the horizontal feed mixing equipment has the disadvantages of large size, large occupation and high price. It is also difficult to operate and needs regular inspection and maintenance.
TMR mixer advantages, feed utilization rateAll weather feeding (24h)Feeding traditional feeding regularly and separatelyComparison of traditional feeding and TMR rearing methodsNo kneading functionLooking for wasteWaste!Mixing effects were excellent for TMR dietsPopularity of TMR technology in China
Mixer is the necessary equipment in feed processing. Corn and other materials to be crushed by a spiral feeding machine give grinder. Crushed by the fan through the pipeline give above the agitator inlet falls within the machine. After crushing. Open the mixer. The mixer below the inlet with the remaining materials, the mixer upgrade spiral crushed corn flour and other material to the upper part of the stirrer, then use centrifugal force of the screw shaft will be removed and the mixed material evenly. So cycle. Achieve the purpose of mixing.The mixer is composed of a mixing chamber, a screw shaft, a discharge port and a transmission part. The screw shaft by different rotation direction, single helical blade and headband inside and outside the main shaft. In the mixing chamber. The central shaft is provided with inner and outer ring type two layer spiral. The rotation direction is opposite to each other. The material and pre mixture respectively from the machine cover is in stick material room. The screw shaft by wheel gear motor drives. The spiral shaft rotates. The material is stirred, and leaves the material along the inner ring to the right-hand end. L leaves the material along the outer ring to the other end. By constantly turning the convection and shear. The homogeneous mixing of materials.
Advantages and disadvantages of feed vertical mixer.Advantages: feed vertical mixer has the advantage of low power consumption, small occupied area, and low price, high price, very suitable for small feed processing.Disadvantages: the biggest drawback of the vertical feed mixing equipment when the mixing ratio is low, can only reach about 87%, and mixed cycle longer, lower production efficiency, output per hour in 500-1500 kg. One of the drawbacks of this vertical mixing device is that the discharge is not complete, and the bottom of the barrel often has surplus material which can cause waste.The advantages and disadvantages of feed horizontal mixer.Advantages: horizontal mixer using probability feed in feed processing is very large, because this feed machine has high mixing uniformity, short mixing time, high production efficiency, fast unloading, unloading clean, and many other advantages of small residue. The more common horizontal feed mixer is stainless steel double blade mixer, horizontal screw mixer and so on.Disadvantages: relative to the feed vertical mixer, horizontal feed mixing equipment of large volume, covering more high prices and other disadvantages, the operation is relatively cumbersome, require regular inspection and maintenance.
