What should I pay attention to when installing LED soft light belt?
Each meter has a "scissors" mark, only in the mark to cut, scissors or scissors will lead to one meter does not light, it is best to carefully look at the mark before the location, according to the middle of no connection can be cut.
Power connection method: LED lamp belt voltage is 12V DC, so it needs to use switch power supply, the power supply size according to the power of LED lamp belt and connection length to decide. If you do not want to take each LED lamp with a power to control, switching power supply can buy a relatively large power for the total power supply, then put all LED light with all input power in parallel (wire size is not enough, can also extend) unified by the total power switch. This advantage can be centralized control, inconvenient place is unable to achieve a single LED lamp band lighting effect and switch control, which specific way to be measured by their own.
Notes on installation of LED lamp band:Compared with the traditional LED lamp with lighting, or are in the development of new products, so many consumers on how to install the LED lamp belt is not very understanding, in the installation process may occur in a variety of problems led lights with LED can not be used, the correct use and installation of LED lights, LED lights with prolonged service life. We also need to understand the problem. LED lamp belt at the time of installation, must be in accordance with the concise, use the correct method to carry out the installation, if excessive distortion or incorrect use of the installation method, are easy to light with losses, reduce the lamp with the use of time, is not conducive to the maintenance of the lights. Provide you with the following details should be noted when installing the light belt:
Note that the LED light belt connection distance: Generally speaking, the 3528 series of LED lights belt, its connection distance is 20 meters long, 5050 series of LED lamp belt, the longest connection distance is 15 meters. If the connection distance is exceeded, the LED light band is easy to heat, and the service life of the LED light belt will be affected during use. Therefore, the installation must be in accordance with the requirements of the installation of manufacturers, should not let the LED lights with overload operation.
