Home > categories > Minerals & Metallurgy > Composite Tank > What should we pay attention to when installing FRP tank for hydrochloric acid?
Question:

What should we pay attention to when installing FRP tank for hydrochloric acid?

What should we pay attention to when installing FRP tank for hydrochloric acid?

Answer:

Because some of the hydrochloric acid tank plastic flange because of material than steel plate soft, in connection with other flanges, should pay attention to strengthening. The flange of the company supporting the factory general is tightening, in the transportation, loading and unloading may cause loose, check the user in the sealing performance should be used before the anti-corrosion tank, and observe whether liquid leakage. Tank containing hydrochloric acid for chemical liquid, it is best to test it with water to prevent loss.
The tank shall be placed in a base made of cement bricks. The base height is generally half of the tank. (user if necessary to the company free of charge from the base design) base making site pile method, namely: the hydrochloric acid storage tank placed in the place of use, and then cement bricks to fill up, and pay attention to put some sand filled in the barrel body and the contact surface to be the foundation of cement brick brick, fully solidified, and then cast the use of material.
When the liquid inlet of the hydrochloric acid tank is higher than the bottom of the tank, the inlet shall be bent towards the tank wall so that the liquid enters the tank wall and reduces the impact on the bottom. If the liquid level of the hydrochloric acid tank can not be controlled, the overflow port shall be installed on the hydrochloric acid tank to prevent the spillage of liquid and cause unnecessary harm.
When the liquid inlet of glass fiber reinforced plastic hydrochloric acid tank is higher than the bottom of the tank, the inlet shall be bent towards the tank wall so that the liquid enters the tank wall and reduces the impact on the bottom. If the liquid level of the hydrochloric acid tank can not be controlled, the overflow port shall be installed on the hydrochloric acid tank to prevent the spillage of liquid and cause unnecessary harm. When the inlet and discharge rate of hydrochloric acid tank is large, the exhaust hole of corresponding flow rate should be installed. When changing the liquid, it is necessary to know whether the tank is allowed to hold the liquid.

Share to: