What the forklift needs to be aware of...
Apprentice can need not when, formal and normal circumstances must show certificates, attention should be paid to in addition to the daily maintenance of actually running a forklift is nothing particularly noteworthy everything according to the articles of association to can the specific is to pay attention to safety, and regularly check a forklift parts, including brake, pipelines, whether the brake fluid, hydraulic transmission, etc.
No more than 30km/h when driving a forklift in the main road of the factory, no other road should exceed 20km/h. Keep a certain distance from the vehicle in front of you, and when you go forward, you should send a signal to pedestrians or vehicles. The speed of the driving forklift should be slow and steady while unloading, and notice that the wheel should not be crushed by any other object, such as cushioning, etc. After unloading the cargo, you should land the cargo fork to the normal driving position before moving again.
Seven, the driver at the fork, on-demand check goods fork spacing, load balance, make the two fork pallet fork deep under the load should be as much as possible, pay attention to the pallet fork pointed cannot meet any other goods; Use the smallest door frame to lean forward to stabilize the cargo and avoid slipping backward. The bottom of the cargo fork should be kept at 300 to 400mm. The forklift truck should be turned into a forklift when the driver's sight is hidden from view. When reversing the car, it is necessary to make a reverse signal, and the rear wheel has to pay attention to the swing of the car, the speed of the car should be steady, and the car and pedestrian should be observed before and after. Nine, driving forklift may not be the goods at the scene of the in and out of work or driving fork rises too high, pay attention to the above the presence of obstacles blocking, banned cargo moving in on the brakes and high-speed turning. No more than 30km/h will be allowed to drive a forklift in the main road of the factory, and no other road should exceed 20km/h. Keep a certain distance from the vehicle in front of you, and when you go forward, you should send a signal to pedestrians or vehicles.
The forklift truck is prohibited from taking the goods at high speed and forbidding the personnel to stand on the fork; When taking the cargo work, the personnel are not standing around the fork, so as not to be hurt. The driver should check the crane chain, the door frame, the cargo fork, and whether the bolt is firm. Check for fuel oil, lubricating oil, check start-up, operation, and braking performance. Check the light and sound signal to be fully valid and confirm normal restart operation. After starting the engine, listen to the operation of the engine and check the instructions of each instrument. When there are mechanical problems, you can't repair yourself. You should close the forklift and inform the mechanic. The driver should observe four weeks before the start of the forklift truck. The carrier will start off slowly and smoothly and make sure the cargo is stable and reliable.
driving a forklift personnel must go through professional training, through the assessment of safety production supervision department, made the special operation certificate, and with the approval of the company before driving, it is forbidden to unlicensed operation. Don't drink and drive. Don't eat and drink. Talk. Second, the driver should follow the rules of the law, standardize the operation, safety the driving, and raise the ideological consciousness of "safety first and prevention first". When driving a forklift truck, it is forbidden to raise the personnel of the cargo fork to engage in high-altitude work, so as not to cause a crash to crash. The use of a single fork is prohibited. The loading of the fork shall be in accordance with the load regulation.
