What tools do you need to fill the tires?
It is best not to fire up because now is the best way to tire rubber in tire glue sheet can try the film if mushroom is large enough
The fire is the most traditional repair measures, because the tire manufacturing process and tyre repair technology, fire up has been rarely seen. The same fire up to remove the tire, and then the rubber chip dedicated attached to the wound, the wound with baking baking machine, not completely fit the film and tire. The benefits of fire repair is very durable, but the maintenance technology requirements are high, and bad will damage the tires, now the car tire repair has been very little use.Although the tire economy, but not all things can be repaired, such as tire wall appeared more than 1 cm wound, or crown was reinforced and other objects pierced, resulting in a large loophole, or to replace the new tires, can not give up the safety of emphasizing economic.
Paste filling is a very common tyre repair method, when you go to the store when the tire tire repair shop, usually the master will take the initiative to introduce this method. After the paste up first to find a flat tire, the tire from the wound, remove the wheel, grinding inside the tire and the wound, with special adhesive paste, special rubber tire, and then rolling tools to cement, complete trap. The advantage of this method is that it is more sturdy, but it is not for once and for all. The other advantage is that after the repair, a dynamic balance of the tire is made, which is more conducive to the use of the tire. As for its maintenance price will be based on your choice of tire rubber quality varies from about 20 yuan to dozens of yuan. Rubber is mainly divided into two kinds, commonly used is the rubber pad, the price is relatively cheap, it is the shortcomings of the hole from the inside while fill, but also on the tire hole, water will be from the immersion and destruction of steel wire and ply. The other is a glue, and glue trap method is different the same pad, at the end of the process will be pulled out from the plastic nail, blocked up the entrance to the cave, avoid water from the immersion and destruction of steel wire and ply, the price is relatively expensive.
The complex method of tire trap has the advantages of simple, fast speed and simple repair, failure is also fast, can go faster; repair method of complex and time-consuming, but can use longer
