What way is to clean aluminum doors and windows?
7, always check the aluminum door frame wall junction, falling aluminum doors and windows, if the frame easy to loose the overall deformation, so that windows and doors can not be closed and sealed. So loose screw connections should be tightened immediately, such as screws loose footing, apply a small amount of epoxy cement sealing tune superglue.
6, aluminum doors and windows in use, action to light, push comes naturally; do not find difficult to push hard deadlift, should troubleshooting. Fouling, deformation is the main difficulty sliding aluminum doors and windows, door frames to keep clean, especially clean sliding groove. Available vacuumed tank tops and door seal fouling.
5, you should always check the joints of window and door frames, timely tighten the bolts, replace damaged parts. Positioning axis pin, wind bracing, and springs and other vulnerable parts of aluminum doors and windows, one should always check regularly lubricating kept clean and flexible.
3, the sealing glass tops and aluminum doors and windows sealed plastic insulation is to ensure that the key structure, if off to be repaired, replaced.
4, after the rain, should be dry wet glass door and window frames.
1, when cleaning aluminum windows and doors, not to step on an aluminum frame, and do not pull the frame for support. So easy to wear their own windows or unexpected accidents.
2, aluminum doors and windows with a soft cloth with water or a neutral detergent, do not use ordinary soap and laundry detergent, but can not use scouring powder, toilet cleaning and other fine strong acid cleaner, it will corrode the surface profile.
