Where should the school fire escape be, inside or outside the school?
The 6.0.10 ring fire lane should have at least two lanes connected to other lanes. The end of the fire lane should be back lane or return field, the return area should not be less than 12.0m * 12.0m; for large fire engines, it should not be less than 18.0m * 18.0m.The fire fighting work site and road surface, the pipes and drain etc. should be able to withstand the pressure of large fire truck.Fire lane can use traffic road, but it should meet the requirement of fire vehicle passing and stopping
Construction regulations GB 50016--20066.0.1 street should be considered within the road fire trucks, and the distance between the center of the road should not be greater than 160m. When the length of the building along the street portion is greater than 150m or the total length is greater than 220m, a fire lane through the building shall be provided. When there is a problem, the ring fire lane should be provided.6.0.9 the net width and clearance height of fire lane shall not be less than 4.0m. For the space where the fire engine stops, the slope shall not exceed 3%.Barriers between fire lane and factory building (warehouse) and civil building should not be set up to hinder the operation of fire engines.
The fire lane is for single buildings, school buildings by the different functions of the single building combination. Must set the fire lane according to the standard requirements of the building, must be set up. The school does not exist inside or outside of the points.
