Which is good, wireless relay or routing WDS?
Bridging router media power line transmission wire, this transmission between routers is carried out through indoor supply line, as long as it is in general a meter under the line, can use this way to avoid the wireless bridge wall, was already unable to realize home wiring network coverage is a good choice! But all routers that need to be replaced, including the existing master router, are routers that support this mode of transmission. But generally four of the family in the room, 2 or 3 can meet the coverage! Because wireless transmission is generally separated by 1 walls, there is no problem! Therefore, the location of the bridging router is determined according to the room condition of the home so as to make the bridging router achieve a reasonable coverage!
Wireless relay can be interpreted as a special WDS: SSID and wireless connection, password and encryption the same as the main router WDS, in essence, there is no difference between the two.The above bridge router is wireless, and the transmission medium is radio wave, which is greatly affected by the wall. Generally, the 2 wall signals are lost.
From the principle of WDS and wireless relay is equivalent to second router LAN port to connect the master router (directly connected to broadband router) LAN port, so it can be bridged by a router as a wireless switch up the wireless coverage of new! Wireless link Relay (or WDS) devices access the Internet and are not different from direct connections to the main router.
