Who knows well about the production process of the ceramic fiber?
Ceramic fiber is manufactured by ceramic fiber products undergone accurate clipping, dotting punch, stamping die and other processes (some products are needed to bond by using binders under ultrahigh pressure). Features: 1) Continuous use temperature can reach 1000℃, and short time use temperature can reach up to 1260℃; 2) it’s resistant to acid and alkaline corrosion, and molten metal like aluminum and zinc erosion; 3) It has good high temperature strength and thermal insulation performance (please refer to physical and chemical indicators); 4) It has higher level electrical insulation under high temperature than glass fiber; 5) It is non-toxic, harmless and odorless.
It’s briefly taught in chemistry class at middle school that ceramic fiber is a new lightweight refractory with high temperature resistance, good thermal stability, low thermal conductivity, low heat capacity, mechanical vibration resistance, small thermal expansion and thermal insulation. 1. The manufacturing process of preform body: A. mixing process: weighing and putting in single ceramic raw material in accordance with the formula---stirring well in the blending basin---pumping in the higher place pond---sieving (twice) ---deironing (twice)
Ceramic fiber, a type of fibrous lightweight refractory, possesses so many advantages as light weight, high temperature resistance, good thermal stability, low thermal conductivity, small specific heat and mechanical shock resistance. 1. Diameter of cellosilk: thread throwing fiber is thicker and its diameter is usually within the range of 3.0-5.0μm, while the injection silk fiber is usually 2.0-3.0μm; 2. Length of cellosilk: thread throwing fiber is longer and its length is usually within the range of 150-250mm, while the injection silk fiber is usually 100-200mm; 3. Thermal conductivity: the injection silk blanket is better than the thread throwing blanket for the former has finer fiber; 4. In terms of tensile strength and fracture resistance, the thread throwing blanket is superior to the injection silk blanket for the former has thicker fiber.