Why are there three lines for the controller of the LED light string? What are they?
The LED pipe positive string is connected with 4-5 1K2W resistance strings, and the other end of the resistor is connected with the common positive pole of the controller. LED tube controller's direct bright output (Huang Xian), if the LED tube brightness is not too bright, minus a resistor. Remember not to short-circuit, short-circuit, burn out the controller. The less string LED, the more resistance string.
65 of the LED tubes are connected with 3-4 resistors. One end of the resistor is connected to the positive electrode of the LED, and the other end of the resistor is connected to the common anode of the controller. The blue wire is attached to the negative electrode of the LED tube.
The four cycles are green, blue and white, and the answer is almost the same as that on the top. But the three colors are strung together
Common positive (red line +) is the positive pole for each street lampThree road cycling (blue line) this four lines are respectively connected with the four colors of LED tube anode side run. When the positive pole is connected to the common cathode, remember that the resistor must be connected first to connect to the positive electrode of the LED tube. The bright output (white) is the word to make it bright
