Home > categories > Rubber & Plastics > Rubber Rollers > Why do people always copy my questions and use them as their own?
Question:

Why do people always copy my questions and use them as their own?

*sprays you with a fire hose*

Answer:

E.N. Let's look at it this way. The water going up is traveling at 6.8 M/seand gravity pushing it down is 4.9 m/sec-sec . After gravity stops its upward travel stops , it has traveled 1 m horizontally, it will also trave 1 m horizontallly on the way down. We construct a right triangle, the hypotenuse is 6.8 with a base of 1. Remember : disregarding wind, the water is still travel ing 6.8 m/sc while in the air.. Therefore we can say the cosine of the angle is 1/6.8.1471; cosi of .1471 81.54 degrees. It's been a while; however that's the way i see it.
This may be a little biased because I love Ghost Pokemon, but I would go with Litwick/Lampent/Chandelure. Litwick are extremely easy to find in the Celestial Tower and it learns some pretty decent moves early on. Also, its final evolution, Chandelure, has a base Special Attack of 145! That is amazing! Most all the Fire- and Ghost-type moves Chandelure can learn are Special, so that's a win-win situation.
Push the paper all the way in so that the printe recognises its there
A common problem, if the other answers above failed to work, is due to the paper feed/pickup roller being worn out or dirty it fails to grab the paper to pull it into the printer. When the paper fails to feed in, the printer assumes that there's no paper properly installed gives the paper out error. Remove the paper clean the roller with a soft cloth dampened with alcohol or warm water see if that helps. If the roller is too old or worn out, it will need to be replaced or you can try some rubber roller restorer/rejuvenator that can help old rollers.

Share to: