Why do you add salt to the ice maker? What role does it play?
1, ice machine should not be placed in the outdoor environment, it is best to install in a safe, clean, well ventilated environment, and do not be direct sunlight and rain.2, ice machine can not be near the heat source, the use of the environment can not be less than 5 degrees centigrade, not higher than 40 degrees, so as not to affect the temperature of the condenser too high heat dissipation, can not reach a good ice making effect.3, ice machine should be installed with a smooth platform, and adjust the bottom of the machine screw to ensure that the machine placed level, otherwise it will not cause ice and running noise. There should be space around. In order to facilitate heat dissipation, the left, right and back space of the machine must not be less than 150mm.
Proper salt addition to the ice maker water supply system can greatly improve the quality of the borneol, make the shaping and cutting of the borneol more convenient, thereby reducing the ice scraping noise, and protecting the equipment and consuming less electricity.Ice maker is a kind of refrigeration mechanical equipment that uses water to cool ice through the evaporator to form ice. It adopts refrigeration system to produce ice with water carrier and through a certain equipment. According to the principle of the evaporator and the different production methods, the shape of the ice is also different; people usually ice machine will be divided into ice machine, ice machine, ice plate machine, tube ice machine, shell ice machine, and so on.
4, ice machine should use the provisions of the national standard of independent power, the power supply should ensure reliable grounding, and equipped with fuses and leakage protection switch, voltage fluctuation shall not exceed the rated voltage of + 10%.5, ice machine should be used in accordance with local drinking water standards of water sources, and installation of filters, to remove impurities in water, to avoid clogging water pipes, pollution tank and ice mold, and affect ice performance. The minimum water temperature is 2 degrees centigrade, the maximum is not more than 35 degrees centigrade, the lowest water pressure is 0.02Mpa, and the highest is 0.8Mpa.6, ice machine must be two months to unscrew the inlet hose head, cleaning the inlet valve screen, to avoid sand, mud, impurities, blocking the intake, and cause water inflow, small change, resulting in no ice. Although the ice machine ice making process at the end of each time, will put in the sink after water cooled off, in order to achieve the cleaning effect, it can effectively reduce the scale of evaporator and water circulation system in production, but generally about six months, also want to use ice machine cleaning and disinfection agent on the water pipe, water tank storage, refrigerator and water retaining plate for cleaning and disinfection, and rinse, produced in the cleaning process can not eat ice. When it is not used for a long time, it should be cleaned and dried with an electric hair dryer. The ice mould and the water in the box shall be placed in non corrosive gases and ventilated and dry places, and outdoor storage shall be avoided.
