Why is home installed wireless network repeater, can not get on the network?
Connection method: from the cat out of the network crystal head, insert the routing WAN port, the computer each line with the router of any LAN port connected. To set up the router, you also need a network cable, a temporary computer, and a router to set it up and then unplug it.
Set up the computer: set the protocol TCP/IP property. Right click on the network neighbor - Property - right click local connection - Property - Network - Protocol (TCP/IP) - properties - use the following IP addresses - all set as "automatically get the IP address" and "automatically get the DNS address" to determine. Next, open IE, tools -- options -- connect pages, click, never connect. Note that the original dial-up computer should pay attention: right click on the Internet neighbor - Property - network connection - right click on the broadband connection, cancel the default connection, right-click the local connection, and set it as the default connection. Later on the Internet, not in the computer, with that "broadband connection" or "star speed" dial, the route will help you dial directly, you turn on the computer, just go QQ, open the web page is
Summary: in accordance with the instructions set the router router login to the routing management interface (that lost attempts to enter 192.168.1.1 or 192.168.0.1 in the browser address bar enter the default account password is admin), use the setup wizard, broadband connection type PPPoE, and then enter your internet account and password below, then select the automatic connection or on-demand connection, and then save. Then check to see if the DHCP service has started and that it is in the startup (open) state. Because you need to use wireless, you also need to open the wireless function (usually on a related page) when you need to go to the wireless settings page of the wireless routing at the same time. Save and then quit. Finally, go into the system tool and restart the router (simply unplug the power line and wait a minute to plug it in). Other advanced settings on the router are not busy at the moment, and you can configure it when you are familiar with the routing settings.
