A few days ago to the home of the kitchen faucet for a new, but after the change of the problem came, in the faucet and pots connected after the discovery of the tap base and pots connected is not strong, always able to turn, and later found The bottom of the fixed nut is loose, you want to tighten some of the metal gasket are squeezed and can not be fixed (metal gasket is a single hole screw).
In the middle of the two studs with a few large nuts on the tightened
Take the faucet down, add a rubber gasket in the place of the gasket, the size and gasket almost on the line, if not you can use the waste of the bicycle tube to do their own one, one is not enough with two, according to the original tightened on the line.
The faucet is generally screwed to the nut. Comprising: a threaded member extending in engagement with the faucet and extending through the mounting hole and rotatable over the platform; a nut threadedly connected to the lower end of the platform through the mounting hole, the nut being responsive to the direction of rotation of the threaded member Moving in a direction away from the underside of the platform; a second member connected to the threaded member and parallel to the threaded member, the second member engaging the nut to prevent the nut from rotating when the threaded member is rotated, The nut being moved upwardly and downwardly along the length of the threaded member in accordance with the direction of rotation of the threaded member; and a locking bracket rotatably connected to the nut.
