Wooden doors and windows decoration problems which
Door and window cover inside the base material: window cover with blockboard or MDF production, the first base plate should be fixed in the window frame base keel, and then nail lines; door sets are made of wood frame, planing, planing Straight, and then assembled to install on the wall, and then cover the base board and decorative panels. Hand knocking the door and window cover side panel, if issued empty drums, it shows that the bottom of the baseboard without mats and other grass-roots sheet, should be removed from redo.
Lock the door to open, lock to be smooth, locked in the door and the door on the two parts to match: lock inappropriate, will cause the door switch is not comfortable. Remove the tongue plate, repair the tongue with a chisel, adjust the position of the door lock and then install the tongue. In addition, the direction of opening the door to meet the requirements.
Hinge to the location of accurate, strong installation: If the hinge is not on, it will lead to windows and doors and frame sets do not match, doors and windows switch is not smooth. You can unscrew each hinge a screw, and then adjust the door and window fan and box fit, adjust the repair and then tighten all the screws. If the hinge screws are short, or when the screws on the screw into the nail, no screw, or screw twist, will lead to doors and windows stroll. Should be replaced with the appropriate screw, the screw must be straight, the screw should first nail 1/3, the rest to be screwed into.
Doors and windows fan to Founder, can not warp deformation, doors and windows fan can only plug into the door window frame, and the door and window frame coincide: If the doors and windows fan and the box gap, mainly because the installation is not allowed to repair or door frames and the ground Vertical, you can remove the doors and windows fan re-planing; such as the door frame is not vertical, should be in the frame plate gasket straight.
Appearance to the beautiful: wooden doors and windows on the surface of the film to be smooth, bright, no flow fall, bubbles, wrinkles and other quality defects, no corrosion, dead, broken; package doors and windows sets of wood and doors and windows should be wood, color coordination , Decorative panels and wood lines can not be large color, tree species should be the same.
