In addition to the bathroom, kitchen and balcony, I would like to decorate the whole house is covered with solid wood, because I like to sit on the floor, you have a home shop wood? The weather is relatively humid in the south, it will be difficult to take care of it? Because it is too much, so I intend to fight! Ha-ha
Keel should be used to hold a strong grip of larch, wood and other wood. The moisture content of the keel or floor should be close to the moisture content of the floor. Keel spacing should not be too large, generally not more than 30 cm. Both ends of the floor should be carried out on the keel, not empty, and each keel must be nailed on the nail. Do not use water-based glue. (6) shop floor should not be too tight around should leave enough joints (0.5 ~ 1.2 cm), and should not be laid in case of super wide, wide applications should be separated off, press the copper strip transition
(3) the laying of a good moisture-proof measures should be done, especially on the ground floor and other wet places. Moisture proof measures are coated with moisture-proof paint, moisture-proof film, the use of matting treasure, etc.. (4) keel should be flat and firm, not to use cement reinforcement, it is best to use expansion bolts, nails, etc.. (5) the keel should be used to hold a strong grip of larch, wood and other wood. The moisture content of the keel or floor should be close to the moisture content of the floor.
Laying and maintenance of solid wood flooring (1) the floor should be laid in the late construction, shall not cross construction. Sanding and painting should be done as soon as possible. So as not to dirty the floor or make damp deformation. (2) the laying of the floor should be stacked before the laying of the laying of the site for 1 ~ 2 days to adapt to the environment, so as to avoid the expansion of the deformation after laying.
