Hot Question
- What is the difference between bevel gear and reverse gear, in terms of noise, wear resistance and carrying capacity?
- Knowing the center distance and the multiple of the two gears, the modulus and the number of teeth of the two gears (center distance 157.5) are 1.5 times the speed of the pinion
- What is the maximum force between two feet when an ordinary 45 normalizing gear engages each other without damaging the gears?
- There is a pair of spur gears, Z1=21, Z2=29, M=8, pressure angle =20 degrees, ha*=1, c*=0.25, required to be installed on the two axis of the center distance of 208MM, and the feet are required
- Three sets of gears with the same diameter of cylindrical gear, bevel gears and worm gear tooth which group can obtain larger output torque
- Milling machine at most how many teeth can gear, ask God for help
- The 100t-6 ignition time of fire plug to the point, it is toward the front gear arrow
- When measuring gears, why are they often measured near the high gear section?
- Spur gear modulus 3, tooth number 12, addendum diameter 40, cross tooth number 2, cross tooth distance 13.789-0.03~-0.05, milling machine should be how deep?
- How about Victoria no formal gear