The knife is 20M and the imported milling cutter! The original alloy milling cutter that will roll aluminum scraps and later for the special cutter milling aluminum roll is not how to speed cutting my S3500 F1500 depth is 3M
1) selects the high-quality fine material and the sharp milling cutter;2) the "feed steady, slow and fine";3) spray lubricant and coolant;4) high speed fly milling;5) mirror effect can be achieved.Milling cutter: milling cutter, a rotary tool with one or more cutter teeth used for milling. The margin of each in turn cutter tooth intermittently cut work. The milling cutter is mainly used to process the plane, the step, the groove, the forming surface and the cutting workpiece and so on in the milling machine. In order to ensure a sufficiently high average chip thickness / feed per tooth, the number of cutter teeth suitable for the process must be correctly determined.
It's cheap to use high-speed steel cuttersFine milling generally does not build crumbsIf the water can not see the air blowing
Poppet! S3500? S at least 6000 but it is best to buy crude crude dermatomic faster and cheaper a few dollars to tens of dollars a knife 5 ~ 8MM F3000 problem is not a rough cutting large amount of alloy knife would be sticky knife especially 5060 aluminum!
