What is the gap between the outer circle of the motor bearing and the end cover and the bearing seat hole?

3 answer

Matching of bearing housing and bearing

3 answer

FL206 bearing housings, what are the casting parameters?

3 answer

What does bearing block P209 209 mean?

3 answer

P215 bearing housing

3 answer

Bearing block No. 6201, bearing internal diameter 12mm, outer diameter 32mm, thickness 10mm, what kind of bearings should be used, and its specifications and sizes

3 answer

How is the bearing housing bore on the case cover? Why do we have to do this?

3 answer

What brand of material is used for rolling bearings?

3 answer

The outer ring of the rolling bearing is fixed in the bore of the bearing seat, and the inner ring rotates with the shaft. What load does the outer ring bear?

3 answer

How to solve the looseness of pump bearing seat and bearing sleeve? Please be specific. Thank you

2 answer

Excuse me, how much is the tolerance between the 6204 bearings and the shafts and the bearing housings, in which the inner ring of the bearing is fixed, that is, the shaft is fixed and the outer ring of the bearing rotates. How much is the tolerance?

3 answer

I design closed bearings and install taper bearings. Where should I fill the hole?

3 answer

Single row tapered roller bearing

3 answer

What is the adjusting shim between the end cap of the reducer and the bearing housing?

3 answer

Is not each bearing can use the bearing seat, that can use the bearing seat of what kinds of bearings, as well as the bearing seat is divided into which kinds?

3 answer

Seek UCF203, UCF202, UCF204 bearing seat dimensions

3 answer

The known bearing type is 7307, how to determine the bearing seat size?

3 answer

SOLIDWORKS bearings, bearing seat, there is no model library, usually referred to as "204 bearings" refers to what type?.

3 answer

And bearing 6309 matching bearing block type?

3 answer

Where are the parts of the bearing factory larger?

3 answer

What oil is added to the left bearing seat of the indoor impeller?

3 answer

What is the danger that the gap between the outer ring of motor and end bearing seat hole is too large?

3 answer

What's the size of the bearing seat for the 6307 bearings?

3 answer

209 what bearing seat can be used?

3 answer

Can the rolling bearing be fixed with a sliding bearing seat?

3 answer

Fan bearing block processing problem

2 answer

Which bearing housings should I use for the T318 and 6310 bearings?

3 answer

How to judge whether the roller bearing seat on both sides of the belt conveyor roller is short of oil or not? What is the general oiling cycle? How much is the measurement of each time?!

3 answer

Why is the lug on the two sides of the bearing seat hole higher than the connecting flange of the box cover and the box seat?

3 answer

Requirements for rolling bearing housings, CAD drawings, bearing housings

3 answer