After the hot water bag drain wash, slow heating, salt, then add how much?
Hot water heating time is too fast (within 3 minutes of boiling);Solution: remove the plug, water funnel top baffle gagged inside, the inside of the liquid poured out 1/3, and then use the water funnel into the water is 1/3, the inside of the liquid dilution, this will make the prolong of heating time, heating time is too short, easy to burn out the electric hot water bottle, shorten the hot water bag the use of life.The above problems, simple blame, hot water bag in the electrolyte concentration, heating time is short, electrolyte concentration is small, heating time is longHeating time is too long, there will be no damage to the hot water bag, but waiting for heating time is also very hard, 8 minutes, is a reasonable heating time
If the heating time is short, there is boiling sound, solution, dilute the concentration of the liquid inside, refer to specific methods (two)Another reason is the internal need of air emptying. We use the hot water is injected into the tap water, tap water in long time heating, will produce gas. The plug is removed, the plug mouth filed, the air plug gathered in the mouth, with a water funnel top plate, gagged inside the hold funnel. The air slowly discharged until the water outflow, the plug can be plugged, shaking, basically no water sound, you can.
Hot water bag heating time is too slow (5~12 minutes is normal);Solution: remove the plug, water funnel top baffle gagged inside the hot water bag inside to add a little salt. Salt can be melted in water, and then into the funnel, funnel, into the hot water bag, hot water bag internal salt concentration increase, will shorten the heating time.(note that a little salt can be used when the hot water bag cools)
