Aluminum alloy window glass tape, how fast loading?
The above two methods can only use single material, that is dry material or wet material. If the wet material is used, the first side is fixed and the other side is injected with glue and then injected onto the side. Both the inner mounting method and the outboard mounting method are best for both sides using wet material. The watertight and air tightness and the best effect of glial sickness, it is best to use silicone sealant for good. For ordinary simple aluminum alloy doors and windows, the use of single glass, fixed glass, both inside and outside the use of dry materials. For the Aluminum Alloy windows advanced commonly used sandwich or hollow glass, glass raw materials used by the heat absorbing glass processing or colored glass, glass were used for fixing the wet material or mixed material.
The inside mounting method is opposite to the outside installation method, that is, the operator stands on the indoor floor or indoor high stool to install the glass of the aluminum alloy door and window. In the first window in the fixed slot lateral seal, safety glass, positioning, and then fixed to the inside of the notch is injected in the cavity joint sealant fixed, which is dry and wet two kinds of material mixed use practices.
The outer mounting method is that the operator stands on the scaffold or basket to carry out the glass installation of the aluminum alloy glass window. Fix the sealing strip first, fix the glass, then fix the outer side, and inject sealant into the cavity to fix the joint. This is a mix of dry and wet two materials.
