Suppose that a belt drives two wheels of radii r and R. Assuming r 3 cm, R 6 cm, and the angular speed of the larger wheel is 1600 rpm, determine each of the following.1. the angular speed of the smaller wheel in radians per minute2. the angular speed of the smaller wheel in rpmThank you, all help appreciated.
bad strut or low air pressure. the worst case, it could be to do with your transverse link with the ball joint.
It depends are you a heavy person was the first owner heavy. If it leans that bad it could be bad springs they could be worn not just the shocks. but to answer your quesation it is posible but if its leaning that badly it my be some other problem
Bad or broken spring or broken torsion rod. Replace the complete strut assembly with new springs. Also replace the bearing assembly at the top of the strut. The difference will be amazing.
A wheel of diameter 0.7m rolls without slipping.A point at the top of the wheel moves with a tangential speed 2m/s.At what speed is axis of the wheel moving ? What is the angular speed of the wheel?
1. The angular speed of the smaller wheel 1600 * (6/3) 3200 rpm 3200 * 2π radians per minute 20106 rad/min. 2. the angular speed of the smaller wheel in rpm 3200.
