i am trying an experiment with semi reflective material and one way lenses to exponentialy increase the amount of electricity put out by a solar pannel. but i need to know if there are such things as one way lenses. lenses that let light in thruogh one side of it but reflect ligh through the other side.
Firstly unplug your mouse from the PC and get to hand a soft tissue. Notice the removable cover on the bottom of the mouse. Turn the mouse cover anti-clockwise to release the ball, remove the cover and take the ball out. Use the soft tissue to clean the mouse ball, be sure to remove all dust/hair/debris. Next, notice the 3 rollers within the mouse casing, these are what we need to clean. You can improvise on how to clean the rollers, using your fingernail gets good results, if the mouse hasn't been cleaned before then you will see lots of dust on the rollers, whichever way you choose to clean them make sure you remove all traces of dust/debris as the smallest piece can cause the mouse to behave erratically.
Scrape the door to remove all the flaking and then sand it with a sander. start with medium and then use a fine grit to finish. Wear rubber gloves, safety glasses and dust mask (for sanding). Remove dust and debris with tack cloth and then stain it (still wear gloves) and seal it with a lacquer or shellac. For more information please see /pdfs/HowToPa It's actually directions on painting a fiberglas door, but imagine that staining would be basically the be the same process. Be sure to follow the instructions on the can of stain.
