Can argon arc welding machine be equipped with automatic wire feeding device?
Can. There are now automatic argon arc welding (such as Zhejiang, Kell, NZA-200).
You can match it... However, it is usually used in automatic welding machines.
Argon arc welding machine can be equipped with automatic wire feeding device. The working process of the automatic wire feeding device is as follows:1. The wire feeding machine main body, the wire feed nozzle is connected by the feeding pipe, and the suitable silk disk is installed.2, such as the use of the foot switch control wire and spinning, only the foot switch and the control panel on the wire drawing interface; such as the use of the torch high frequency switch synchronous control wire is spinning, high frequency interface control panel on the outgoing interface and high frequency argon arc welding on the connection, then the high frequency control high frequency on the panel into line with the torch of arc connection.3. If the upper computer needs to control the wire feeder, the internal control communication switch on the control panel should be placed on the communication side. If the upper feeder is not required to control the wire feeder, the internal control communication switch in the control panel shall be placed on the inner side of the control.4. According to the diameter of the selected wire, fit the wire feed wheel.5, the power plug is connected, turn on the power switch, and the wire feeding speed regulation to the fastest, pressing pressure rod, tread down pedal switch, or use the control wire drawing the switch on the panel, the wire feeding mouth to arrive as soon as possible. When the wire passes through the wire feed nozzle, the wire is stopped.6 、 adjust the wire feed nozzle to meet the demand of welding angle. Adjust the parameters of wire feed machine and select the appropriate feeding method to reach the proper speed.7. Turn on the welding machine and weld properly.8. After welding, turn off the power switch and unplug the power plug.
