Home > categories > Minerals & Metallurgy > Binder > Can the tile binder smear the pool surface and soak it in the water for a long time?
Question:

Can the tile binder smear the pool surface and soak it in the water for a long time?

Can the tile binder smear the pool surface and soak it in the water for a long time?

Answer:

Yes, but it depends on the quality. The ceramic tile adhesive reduces the dependence of the traditional construction process on the process of sprinkling and soaking bricks at the grass-roots level, and avoids the problem of insufficient sprinkling caused by the immersion bricks.
1, a packet of materials according to the designated mixing ratio of mixing, stirring until the uniform without caking, let the slurry stand for 3 to 5 minutes, and then stir once, you can use.2, select the appropriate gear scraper to ensure that the effective paste area is at least 65% of the tile area.
3, with the special tooth type blade with mortar 3 to 5 mm thick base group (i.e. sand on the ceramic tile paste, and then use a blade thickness) on one side of the straight tooth shape or S shape pull stripe, scraper plane and the base plane intersection is 45 degrees to 60 degrees. Tiles need not be soaked,4. Just stick to the wall / floor according to the order and then press it down. And adjust the tile position within the specified time. Wet cement can be removed with water, but cured only by mechanical means.

Share to: