Composite floor ground leveling problem?
In general, when you get the house, the ground is leveling with mortar, so the pipeline on the ground is the need to tick slot, buried inside the floor, if the pipe is too thick, it needs to use mortar leveling. Can not tick deep, easy to affect the structure of security. Floor uneven, certainly to leveling, cement mortar can be. Waterproof to do the high point of each other, to reduce the trouble, such as the shower area at least one person high, 1.8 meters above, other locations, at least higher than the height of the basin.
1, need to be buried in the ground 2, the shop compound reciprocity ingot melon melon scallop pigeon sleep Gong Jing board requirements ground level, so the uneven must be leveling. Uneven use of cement leveling, not serious with gypsum powder leveling. 3, waterproof bath over there to do more than one high. Experience is for reference only.
Since the pipeline covered, and then find a master to the ground slot it, if the pipeline tied to warm, then only leveling the water, then 2 meters can be,
Composite floor ground leveling method: 1, if the pavement of the floor on the flatness requirements are particularly high, such as plastic flooring, must be self-leveling processing, but the higher cost. 2, for the general strengthening of the floor or solid wood composite products, can be a small area of uneven ground to take the way to deal with the gypsum, this method is the lowest cost, the main cost is the wages of workers, the general house to spend 100 dollars You can get, gypsum powder plus 801 glue the cost is also very cheap; and gypsum dry particularly fast, one day ahead can do in the dry season and even the day of construction will do. Oil workers, tile workers, shop floor workers can do. 3, the larger area of the uneven can be used to deal with two ways: First, prior to the way to wipe the cement, to do in advance, otherwise the cement will not pass through the floor to leave the dampness of the hidden dangers, affecting the life of the floor. The cost of this approach is low, the need for tile workers to complete.