My LCD monitor is LG47 inch computer graphics card is GT 220, even after it is not clear, I adjusted the resolution 1024*768, frequency is 70HZ, but still can not do it!
Correcting blind spots. You are no longer called LCD, you mean LCD TV, see your separation rate should be sure you plug in the LCD TV behind the VGA interface! So were the highest rate of only so much, if you have the LCD TV HDMI interface on your graphics card also has HDMI excuse then selling HD line docking computer definition will be much higher, because your screen is 47, your current card is not to support such a high resolution. So even with the HDMI will not be as clear as the display, unless you are on the thousand dollars level graphics card, then HDMI (premise your LCD TV resolution is also very high, 1080P) will be very clear. The screen is LED best. LCD is bad, too.
This situation can be solved by reference to the following methods:1, start the computer, come to the desktop, in the blank, click the right mouse button, to open the desktop right-click menu.2, in the pop-up right-click menu, select the property, this one click.3, and then go to the display properties window, move the cursor right, and select the settings tools menu.4, below the settings toolbar, find the screen resolution, a general screen resolution of 1024X768.5, use the mouse to hold down the slider, adjust the resolution, set it to 800X600, set it and press "OK" button. Each person's screen size is different, according to the size of their computer screen to set the resolution. But do not adjust the screen too high, otherwise it will be black screen, that would be troublesome.6, after setting the screen resolution, back to the desktop, take a look at the size of the desktop icon changes, and whether the rubber is clear, and so on, if not suitable, then you need to re tune, directly to the satisfaction.
Convert the resolution to 800X600, which is the default resolution of the adventure Island
The TV should use the best resolution, such as 1366*768 or 1920*1080 Full HD, update the graphics driver, or using third party software PowerStrip auxiliary settings, because each brand of TV graphics and compatibility is good or bad, after the connection will encounter not full screen, unable to use the best resolution and font burr phenomenon, debugging it slowly, there are also many online the forum can learn from TV brand.
