Computer motherboard power switch and indicator light, and from the switch is how to identify and plug the line? Is there any technique for identifying my little brother?!!!
Very simple, you use your flat head screwdriver, in the jumper where try to know!Jumper in the lower right, different motherboard, jumper is not the same, if you have manuals, see at a glance!Using a screwdriver, transverse 2 pin 2 pin test every time a needle in 2, open the power supply (note the screwdriver should be insulated or ~ ~ ~) first find the motherboard power, usually 2 pin is reset (sideways from power), then the lights, the last 2 lines with 4 pin must be inserted the power of the horn is small!
It is usually written on the edge of the pin. Light, restart switch is not anyway, plug in line. If not, you can only look at the motherboard instructions.
Each brand's motherboard is not the same, you have to look at the motherboard manual to know. If the motherboard manual is missing, you go to the motherboard manufacturer's home page to find it.
The power pin is marked in English: "PWRSW" or "SW"The power indicator light is marked in English: "PLED"The pin of the hard disk indicator is marked in English: IDE_LEDReset the indicator light and mark it in English: "RESET"The horn lights are marked in English: "SPEAKER"No English annotation words only looking for class instruction
A group of pin connection line connecting line panel panel are generally in the left lower end near the edge of the motherboard, the general is a double row pin, a total of 10 groups, the main power switch, reset switch, power indicator light, hard light, speaker pin. The connection line is connected with a power supply switch connector 1 power switch, first find the two pin plug marked "power SW" from the chassis panel line, respectively is white brown two colors, and then plug in the motherboard is marked "PWR SW" or "RWR pin" on it.
