Consult the problem of the pressure at the entrance and exit of the pipe jointNow I'm in the oil system design has a 4 joint, one port as the oil inlet, the other three ports as an oil outlet, so, now oil inlet pressure is 2MPA, the oil outlet pressure is not each only 2/3=0.66MPA, because in this way, each oil outlet the flow of oil inlet flow only 1/3, the trouble which master to help me explain, I understand you talked about from the truth, I added 10 points
Assuming two load infinite, a 1MPa load (cylinder or motor) can free action, three exits are linked together, so that the two load does not move, a move, three oil outlet pressure gauge pressure is 1MPa.Assume that one or more of the three is not loaded, and the three outlet pressure is 0, or very small. The three outlet pressure gauges are 0MPa.,You don't design, I'm scared
Assuming that your 3 oil outlet, load is infinite, as follows, three load (cylinder or motor) are not action, three outlet pressure is 2MPa, three outlet pressure gauge pressure is 2MPa
The oil outlet is 2MPa, too,The relation between the pressure at the outlet and what you call the inlet pressure is as follows: