Air plasma cutting machine, what's the cut? Cut Banneng Lu long? Thank you
5., no rain in the open welding. In the wet area operations, the operator should stand in the place covered with insulating materials, and should wear insulated shoes.6. after operation, the power should be cut off and the gas source and water source should be closed.
3. when the cutting pressure container, sealed containers, oil tank, pipeline, with combustible gas and workpiece when the solution should be to eliminate the pressure vessel and piping, elimination of combustible gas and then rinse solution, toxic and hazardous, flammable materials; the container has residual oil, should be the first to use steam, salt water rinse, and open the lid, confirm the container after cleaning, filled with water can be cut. Measures should be taken to prevent electric shock, poisoning and suffocation in welding and welding in containers. The cut and seal containers shall be provided with air holes. If necessary, equipment ventilation equipment shall be installed at the inlet and outlet ports; the lighting voltage in the vessel shall not exceed 12V; the welder shall be insulated from the workpiece; the outside shall be equipped with special personnel supervision. It is strictly prohibited to cut in the container that has been painted and plastic.4. pressure on the pressure vessel and pipe, live equipment, load-bearing structures and parts loaded with flammable and explosive containers are strictly prohibited cutting.
It hurts. . operators must wear protective masks, gloves, hats, electric membrane anti-dust masks and soundproof earmuffs. People who do not wear goggles are not allowed to observe the plasma arc directly. The exposed skin is strictly prohibited to approach the plasma arc.1., the on-site use of plasma cutting machine, should be equipped with rainproof, moisture-proof, sunscreen machine shed, and should be equipped with appropriate fire equipment.2. high altitude cutting, you must fasten the seat belt, cutting, cutting, cutting and surrounding should be taken fire precautions, and should be supervised by special personnel.
