Glass film is posted outside or inside
Hello:
Car foil is to be affixed to the inside of the car glass, the reason is very simple and then there will be no wind inside the rain, the use of the film will not be too much external interference, because the film stick to the wind, Baptism, sure that the paste is very strong, the use of the inside will not be affected.
As the film is attached to the inside of the car glass, so the wiper will certainly not scratch the glass film, because the wiper is outside, when the car film does not have to remove the car glass, if it is so the film is too dangerous , Accidentally broken glass had to pay their own money.
Of course, this is a digression, car foil is actually a very technical content of the work, much more difficult than the building film, because the car is a curvature of the glass, and architectural glass is not much curvature, a film cutting After a good glass according to the curvature of the glass and stereotypes, and then accurate cutting film, and then is the inside of the film.
Poor insulation film hazards:
1, the binder contains formaldehyde, benzene and other high-risk substances, the decomposition of sunlight after evaporation, damage to the owner and the car's health.
2, clear enough, there are mist-like fuzzy block, easy to make the driver eye fatigue, or visual blind spots, causing accidents, resulting in personal property losses.
3, by the impact of external forces, the glass can not firmly stick, broken glass damage ride personnel, the current survey of such a glass wounding results in the accident accounted for more than 80%.
4, the cabin can not break the interior of the window, so that the crew can not escape in the event of an accident, the protective film has become a fetter, the result is worrying. (And the true insulation film can not be crushed from the outside, but can be easily broken from the inside)
Above these hope that we can look carefully, so that when the film can be avoided when the fooled. There is the most sophisticated technology of the current car film is vacuum magnetron sputtering, this technology is the metal atoms in accordance with the principle of spectral rearrangement, the use of the principle of reflection for insulation, the warranty period is generally longer, the lowest Is more than 8 years, have a regular warranty book, please do not covet small cheap in order to save a little money and not warranty book. This is the future of the car film problem of proof of rights
Car film film, especially as the master ZZ Z70 top metal front file of this good film - magnetron sputtering film, the baking sheet is very difficult to bake, because the film to take into account the film will not be damaged, can not be uneven , There is a metal film, especially the metal layer more membrane (no pollution, will not distribute formaldehyde and other substances, no additives, long life, the use of good results and a long time, the warranty is more than 8 years) More difficult, but the membrane stability is very good.
The current market, a lot of garbage film, such as dyeing film and heat-absorbing film, there are a lot of people say that will not recognize, in fact, the characteristics of these garbage film I said many times, and here once again repeat:
Characteristics and hazards of poor quality membranes:
1, opened the transparent layer when you can smell the pungent odor.
2, start with the effective, long time can not be very good insulation, separated by ultraviolet light. (Poor insulation film in the adhesive against a little heat insulation chemicals and anti-ultraviolet chemicals, use a little longer or too high heat, it will soon be distributed or the reaction, loss of function)
3, the use of glass film in the process of fading, cracking, blistering and other conditions.
Poor insulation film hazards:
1, the binder contains formaldehyde, benzene and other high-risk substances, the decomposition of sunlight after evaporation, damage to the owner and the car's health.
2, clear enough, there are mist-like fuzzy block, easy to make the driver eye fatigue, or visual blind spots, causing accidents, resulting in personal property losses.
3, by the impact of external forces, the glass can not firmly stick, broken glass damage ride personnel, the current survey of such a glass wounding results in the accident
