Wire printed on the word what way to erase
But Xiao Bian that appropriate to understand the technical knowledge is harmful and useless Such as with some basic operational capacity, so that you can deal with electronic truck scale daily problems
Friends who use electronic truck scales, maybe you do not need to be very proficient in the knowledge of truck scales
If it is silk screen, with alcohol can be wiped off
Below Xiaobian to introduce some of the attention in the replacement of damaged electronic truck scale weighing sensor knowledge For replacement of the sensor, should be in accordance with the requirements of manufacturers to avoid new damage Replace the specific steps are as follows: open the damaged sensor above the cover, jack up with the scale, remove the connector If there is a limit bearing, remove the limit bearing open the junction box, the damaged sensor cable and the junction box to disconnect, remove the cable to fix the cable clamp, pull out the cable at the sensor side Note: In the drawing line, with a lead through the scale platform, so that when the replacement of new sensors, it is easy to cable through the weighing platform into the junction box with a socket wrench to release the fixed sensor high-strength nut, remove the sensor Install the new sensor, secure the sensor with high-strength bolts and nuts, and tighten the nut with the torque wrench at the specified torque refer to the method of the new sensor cable through the weighing platform into the junction box, with cable clamp fixed cable according to the wiring diagram of the cable wire core fixed in the junction box corresponding to the terminal or solder joints Note: Do not have Weld, solder joints need to use alcohol to wipe the flux the installation of connectors (bearing head painted butter) and the limit bearing Loosen the jack, put the scale platform, cover the cover the replacement of the sensor, the electronic truck must be re-set, marked
