My house is decorated with a good ceiling, and now when the crystal lamp installed when the workers said afraid of hanging. How to do ah, it was said that with the expansion of the lamp hanging on the top of the lamp, my mother afraid to unload the heavy unloading, is not it very troublesome ah?
Strictly speaking, gypsum ceiling can be installed crystal lamp. But there is a prerequisite, that is, crystal lamp fixed position of the screw, or crystal lamp boom, must be installed in the gypsum ceiling above the keel to load. Gypsum board itself can not afford the weight of the crystal lamp. So that the problem came out: If your home crystal lamp installed in the middle of the living room, but the keel has not been through the need you fixed that position, so that can only find the keel position, resulting in crystal lamp installed out of the effect is not ideal, Deviation from the location, will lead to the effect of the installation is completely uncoordinated. So in order to avoid such a situation, the installation of crystal lamp position, is the need to do special treatment of woodworking master, the most simple and effective way is to add a plywood in the location, so you can achieve the desired effect, and solid Without deviating from position.
The gypsum board cut off about 200x200mm hole, called the workers with the impact of the drill drill chandelier boom fixed to the ceiling, and so fixed, and then paste the gypsum paste this hole on a 200x200 gypsum board can be, The painter can not see it.
