Home wash basin faucet bad how to change
Separate inlet pipes and hoses by saws: Since the faucets in the bathroom are not installed, they can not be separated from the hoses and hoses. At the same time, if the saws are cut directly, the water holes in the saw are re-connected to the new hose A bit difficult.
Saw the saw on top of the faucet: If you drop the oil at the interface, tighten the tape, the interface is still motionless, you can only continue to use the saw violent demolition. Kitchen countertops do not like bathroom table, if you can not remove, you can only first saw the top part of the top of the table, so that the faucet and the table separated.
First to the water of the total gate off, and then look at your home faucet is what kind of, some in the wash basin under the screw twisted, so first screw the first twist, there is a more ancient is direct Twist the beginning of the faucet can be.
1, the interface rust is difficult to remove: the bathroom faucet in the demolition, at least into the water pipe connection is easy to separate. The kitchen, whether it is the water inlet or faucet with the table connection, the two interfaces are difficult to unscrew.
