Household set-top boxes installed why display E06 sorry, unauthorized card

Answer:

This is a signal to adjust the situation, put the lid on your open receiver, behind the cross screwdriver unscrew the two screws on the receiver can open, open after you watch, a panel is put mobile phone card slot, you put the card into the mobile phone, mobile phone card arrears not GPS, also opened the network, you will see a prompt 30 seconds, press the green button, the red button, you press the red button, the red button is stored, wait 30 seconds will prompt confirmation. And. Press. Return. You press confirm, wait 30 seconds will be prompted to send failure this time you put the receiver power plug and then plug power, later prompted by the red button and green button, you can press the red button, in 30 seconds prompted by the confirmation and return you to confirm, wait 30 seconds, will be prompted to send congratulations on your success! Please wait while installation process...... Just a minute, OK, I don't understand

In 10, the channel screen pop-up "smart card is not card, whether to install, choose to confirm the installation, choose to return to play free program dialog box, press OK to open and install;11, later automatically pop-up information box prompt "send successfully", after the menu, the upper right corner of the screen prompt "during installation, please wait."..." 2-3 minutes later, the screen will automatically pop-up "installation success", such as to pop-up this information, please wait patiently for about 10 minutes;12, automatically play programs later, authorized to complete, you will be able to watch TV properly.

7, select the "base station information" in the system settings, press confirm;8, wait for the satellite to automatically search mobile base station information, according to the base station signal strength, will automatically list the base station information;9, wait for the base station information pop-up, appear on the TV to the base station information, click the orange button "storage confirmation"";

4, network connection settings. IP settings: 114.251.156.067, port settings: 4567 or 04567;5, the area code is set to the first six places of the local ID number;6, turn off the set-top box power, insert the mobile phone card and smart card, and then boot;7, select the "base station information" in the system settings, press confirm;

Household set-top box installed E06 card is not sorry, because there is no authorization card, card method:1, press the "menu" button on the remote control, enter the "main menu" interface, select "system settings"";2, enter the password "9999"";3, in the "system settings" interface, select "installation and signal detection" (the default has been selected), press the remote control "confirmation" button two times. Standing in the back of the satellite antenna, satellite antenna for the positive from south to slowly turn the direction of the satellite (suggested that the rotational speed is slower than the speed of the second hand watch). In the process of turning to stare at the TV satellite receiver debugging interface signal strength and signal quality change indication signal turns green when stop action, that has been locked and identify the satellite satellite signal;